14 replies to this topic

[Zage]

I figured I'd start a topic were you could post pictures of cool, interesting or just plain weird terminals you found.

Here is one from a Doppelmayr HSS.
 six_pack_1.jpg (64.04K)
Number of downloads: 107

Here is a nice one from a Girak-Garaventa HSQ.
 cool1.jpg (125.73K)
Number of downloads: 70

Here is a Poma HSS.
 cool2.jpg (31.07K)
Number of downloads: 59

This one is interesting, a Von-Roll HSD.
 cool3.jpg (110.14K)
Number of downloads: 111

[Zage]

Here are some of the Omega terminals Poma first experimented with. I'd like to thank Lift-World for the photos.

Attached File(s)

•  omega.jpg (37.61K)
  Number of downloads: 78
•  omega1.jpg (48.04K)
  Number of downloads: 72

[Kicking Horse]

Zage, on Aug 17 2005, 10:23 AM, said:

Here are some of the Omega terminals Poma first experimented with. I'd like to thank Lift-World for the photos.
<{POST_SNAPBACK}>

I like thoses Terminals....

[Zage]

Poma's Satellit terminals are interesting.
 sat.jpg (340.36K)
Number of downloads: 46  sat1.jpg (463.51K)
Number of downloads: 36

And if you go toPoma and go to detachable chairlifts and gondolas and click on the "Satellit terminals" link it will give you some good pics and info and design and construct your own terminal.

This post has been edited by Zage: 22 August 2005 - 12:06 PM

[skiersage]

I think the terminals on the big burn at Snowmass are cool and interesting. it's too bad that they plan on removing it.

This post has been edited by skiersage: 22 August 2005 - 12:11 PM

[crazyskier91]

They are planning on replacing the Big Burn lift?

[Kicking Horse]

yes they are.

[Benbosnow]

hey i found this termainal on google. dont know where it is.

 SZ13_01.jpg (38.01K)
Number of downloads: 73

[floridaskier]

Is that a Garaventa MCS terminal?

[SkiBachelor]

Yes it is and that's a sweet looking terminal.

[Jonsson]

http://www.doppelmay...p?lid=2&frs=210 Check out the last HSE (Europa 8) now thats a nice looking terminal

[skiersage]

Look at this terminal. It is almost like a Uni-g for fixed grips. Uni-star

[Zage]

Here is a sweet one from a Leitner bi-cable gondola.

Attached File(s)

•  paradiso.jpg (92.96K)
  Number of downloads: 51

[SkiBachelor]

The UNI-STAR is more like a UNI-GS than the UNI-G. However, there are some fixed grip terminals that look like the UNI-G.

[phillybluntz]

It seems that the Europeans take more care of their equipment than we do. Also take more pride, I have noticed that some of the terminals have wood trim and seem to be very well looked after opposed to many of our lift s which are faded and rusty.