41 replies to this topic

[KZ]

Well i was going to make a page, but i was doing it all wrong, so ill just post the pictures here for now, and work on the mammoth/june pictures over time. Hopefully i will have the Mammoth and June Lift Pages up soon, in the meantime, here are the interesting lifts at June Mountian


Starting with J1, the chair that accesses the entire mountain. It is a riblet, but it has a Yan Drive terminal at the bottom. The lift runs very slow due to foot traffic riding it up to Mid Chalet, since there is no food at the parking lot. The lift also must download all guest when the lower runs are lacking snow, as it was last week. It really stinks since the QMC is out, cause the lift is pretty long, and is pretty steep.

Here is the Drive Terminal:

Attached File(s)

•  J1_1.jpg (53.59K)
  Number of downloads: 81

[KZ]

Looking up the lift line and the interesting maintenince carrier on the downhill side

Attached File(s)

•  J1_2.jpg (44.2K)
  Number of downloads: 63

[KZ]

The return bulwheel and Mid-Chalet in the background

Attached File(s)

•  J1_3.jpg (46.99K)
  Number of downloads: 42

[KZ]

Nice Breakovers just before the Unload station. 5 Towers

Attached File(s)

•  J1_4.jpg (43.85K)
  Number of downloads: 54

[KZ]

The return, and the foot passenger loading and unloading

Attached File(s)

•  J1_5.jpg (41.59K)
  Number of downloads: 47

[KZ]

Here is the J2 Double Chiar.

This lift is another story with SLI chairs and Towers, a Yan Drive, and Riblet grips, and a few Riblet Sheaves

Attached File(s)

•  J2_1.jpg (44.74K)
  Number of downloads: 42

[KZ]

Looking down the lift line

Attached File(s)

•  J2_2.jpg (43.45K)
  Number of downloads: 29

[KZ]

THe yan drive terminal

Attached File(s)

•  J2_3.jpg (35.42K)
  Number of downloads: 30

[KZ]

THe drive again, with Mid-Chalet in the background

Attached File(s)

•  J2_4.jpg (44.16K)
  Number of downloads: 30

[KZ]

J3, a Riblet center post double chair

This lift is one of the 2 unalterd lifts at June Mountain

Attached File(s)

•  J3_1.jpg (38.73K)
  Number of downloads: 36

[KZ]

A good 'ol Riblet in ground drive with the Driveshaft exposed

Attached File(s)

•  J3_2.jpg (39.48K)
  Number of downloads: 42

[KZ]

The unload ramp, just before the drive

this is a very short lift, and only servers the purpose of getting people back to the run that goes to mid-chalet

Attached File(s)

•  J3_3.jpg (37.17K)
  Number of downloads: 40

[KZ]

The return bullwheel at the bottom of the lift

Attached File(s)

•  J3_4.jpg (38.73K)
  Number of downloads: 35

[KZ]

J4, another strange mutt lift

SLI Chairs and a few towers and sheaves, some Riblet sheaves and grips, and YAN terminals and drive

Attached File(s)

•  J4_1.jpg (32K)
  Number of downloads: 39

[KZ]

The drive

this lift also has a few yan towers

Attached File(s)

•  J4_2.jpg (37.17K)
  Number of downloads: 33

[KZ]

The drive again

Attached File(s)

•  J4_3.jpg (33.26K)
  Number of downloads: 18

[KZ]

The return

Attached File(s)

•  J4_4.jpg (48.61K)
  Number of downloads: 26

[KZ]

Lift Line

Attached File(s)

•  J4_5.jpg (38.32K)
  Number of downloads: 27

[KZ]

J5, the second all original lift, Riblet Center-Post with side tensioning :)

Mid station

Attached File(s)

•  J5_1.jpg (38.93K)
  Number of downloads: 62

[KZ]

Drive with the counterweight on the side of the terminal, noted by Ryan B. on the old Riblet KT-22 Double

Attached File(s)

•  J5_2.jpg (36.92K)
  Number of downloads: 67