Jump to content


Favourite lift company?


  • You cannot reply to this topic
25 replies to this topic

#1 Sacdelic_Skier

    Established User

  • Member
  • 164 Posts:
  • Interests:Skiing

Posted 11 January 2016 - 03:35 AM

This probably already has a thread but why not start another! What is your favourite lift company and why? (defunct or not)
The Ski Lift Enthusiast
http://sugarloafphotos.blogspot.com/

#2 Yooper Skier

    Established User

  • Industry II
  • 234 Posts:

Posted 11 January 2016 - 02:59 PM

Hall. Classic, well-built machines.

#3 RibStaThiok

    Established User

  • Member
  • 1,057 Posts:

Posted 11 January 2016 - 03:03 PM

That's a tough one. Thiokol,(Might as well include the CTEC Fixed Grips with that since they were pretty much a carryover of the Thiokol in many regards for quite a few years) After that it would no doubt be Hall and Von Roll. I'd include Riblet too but I'll let someone else from on here do that :)

This post has been edited by RibStaThiok: 11 January 2016 - 03:08 PM

Ryan

#4 Sacdelic_Skier

    Established User

  • Member
  • 164 Posts:
  • Interests:Skiing

Posted 11 January 2016 - 03:44 PM

I am quite a fan of both. My personal favorite is Borvig. USA built and very comfortable might I add. The Borvigs from the 60s and late 80s are the best.
The Ski Lift Enthusiast
http://sugarloafphotos.blogspot.com/

#5 NHskier13

    Established User

  • Member
  • 567 Posts:
  • Interests:Yes

Posted 11 January 2016 - 05:53 PM

I like borvigs, but I really like any fixed grip lift that isn't Yan. All around, though, I'd say either CTEC or Poma. We don't have many Poma built lifts in New Hampshire, I think only 4 high speeds, and I think only a couple fixed grips.

#6 Conrad

    Established User

  • Member
  • 152 Posts:
  • Interests:Skiing, Hockey

Posted 11 January 2016 - 07:34 PM

My vote is for Hall. I also appreciate some older Yan lifts, but not so much the newer stuff.

#7 Yooper Skier

    Established User

  • Industry II
  • 234 Posts:

Posted 12 January 2016 - 04:06 PM

View PostSacdelic_Skier, on 11 January 2016 - 03:44 PM, said:

I am quite a fan of both. My personal favorite is Borvig. USA built and very comfortable might I add. The Borvigs from the 60s and late 80s are the best.

Leitner was a supplier of grips, sheaves/assemblies, along with other components from the mid-80s on, so there was an Italian influence. The rest came from Pine Island, NY.

#8 NoPainNoJane

    Established User

  • Industry II
  • 169 Posts:

Posted 12 January 2016 - 04:19 PM

I'm torn, I'm a fan of both Soloy & Bell helicopters ;), of my trips way north, I have found both to be very reliable, although a very tight fit all the time, but that's the price you pay when heli-boarding

#9 Sacdelic_Skier

    Established User

  • Member
  • 164 Posts:
  • Interests:Skiing

Posted 13 January 2016 - 03:13 AM

View PostYooper Skier, on 12 January 2016 - 04:06 PM, said:

Leitner was a supplier of grips, sheaves/assemblies, along with other components from the mid-80s on, so there was an Italian influence. The rest came from Pine Island, NY.

right i knew that but forgot. thanks
The Ski Lift Enthusiast
http://sugarloafphotos.blogspot.com/

#10 SkiDaBird

    Established User

  • Member
  • 509 Posts:
  • Interests:Skiing

Posted 14 January 2016 - 09:55 AM

CTEC chairs are the most comfortable, so from a skiing only perspective, they're my favorite. I'm sure if I worked in maintenance, what broke the least would be my favorite.

#11 vtbubble

    New User

  • Member
  • 24 Posts:

Posted 14 January 2016 - 02:02 PM

I might as well start off the more modern companies with leitner poma as aesthetically they look great and they are some of the most comfterble chairs I've ridden. For Old school companies I would have to say yan.

#12 Liftkid99

    Established User

  • Member
  • 49 Posts:

Posted 15 January 2016 - 04:24 PM

For old probably Mueller, I like their design and also the look of their lattice towers. For newer I'd say Doppelmayr even though I'm more familiar with Leitner Poma

#13 Aussierob

    Lift Sparky

  • Industry II
  • 1,029 Posts:
  • Interests:Search and Rescue
    Hockey
    Ski Touring
    Geocaching

Posted 17 January 2016 - 01:20 PM

Doppelmayrs
Rob
Ray's Rule for Precision - Measure with a micrometer, mark with chalk, cut with an axe.

#14 boardski

    Established User

  • Industry II
  • 760 Posts:

Posted 18 January 2016 - 03:15 AM

My vote is also Doppelmayr.
Skiing since 1977, snowboarding since 1989

#15 liftmech

    lift mechanic

  • Administrator II
  • 5,906 Posts:
  • Interests:Many.

Posted 18 January 2016 - 10:15 AM

Anything built with the mechanic in mind.
Member, Department of Ancient Technology, Colorado chapter.

#16 Yooper Skier

    Established User

  • Industry II
  • 234 Posts:

Posted 18 January 2016 - 02:37 PM

View Postliftmech, on 18 January 2016 - 10:15 AM, said:

Anything built with the mechanic in mind.

Hear hear! :cheers:

#17 Petz

    Established User

  • Member
  • 80 Posts:
  • Interests:Old ropeways, technics, modelling

Posted 06 February 2016 - 07:15 PM

Historic Carlevaro & Savio / Marchisio group cause they had built the most rugged lifts that can be found.

This post has been edited by Petz: 06 February 2016 - 07:17 PM

Best regards, Markus
"You have to pay for the experiences during your life - sometimes youŽll get some discount" (Oskar Kokoschka)
My german modelchairliftpage:
www.modellseilbahnen.com

#18 NHskier13

    Established User

  • Member
  • 567 Posts:
  • Interests:Yes

Posted 06 February 2016 - 09:09 PM

Hall built lifts are pretty nice - their carriers aren't very comfortable but the ride is very smooth on most I've ridden. Same with Muellers, mainly pats peaks', but not quite as much. I wouldn't know too much about riblets, considering only one area near me has them (Crotched Mountain)

#19 SkiDaBird

    Established User

  • Member
  • 509 Posts:
  • Interests:Skiing

Posted 06 February 2016 - 10:08 PM

View PostNHskier13, on 06 February 2016 - 09:09 PM, said:

Hall built lifts are pretty nice - their carriers aren't very comfortable but the ride is very smooth on most I've ridden. Same with Muellers, mainly pats peaks', but not quite as much. I wouldn't know too much about riblets, considering only one area near me has them (Crotched Mountain)

Riblets aren't the most comfortable, but I have been on worse. They are smooth over towers though.

This post has been edited by SkiDaBird: 06 February 2016 - 10:08 PM


#20 snoloco

    Established User

  • Member
  • 444 Posts:
  • Interests:Skiing
    Ski lifts
    Ski areas

Posted 07 February 2016 - 06:08 PM

I've always liked Poma a lot. They make the fastest and most comfortable lifts out there. The Omega and later Arceaux/Falcon chairs almost always come with thick padding, much better than Doppelmayr's EJ chairs. Riding one of their bubble chairs is like riding up the mountain on your living room sofa. They're also smooth as glass and super quiet.





1 User(s) are reading this topic

0 members, 1 guests, 0 anonymous users