Jump to content


Questions about lift relocations

south america riblet poma SACMI montaz-mautino ski lift international doppelmayr europe

6 replies to this topic

#1 passengerpigeon

    Established User

  • Member
  • 48 Posts:
  • Interests:Skiing, ski lifts and ski areas, among other things

Posted 10 February 2015 - 03:30 AM

Hello,
A while ago I read the South American reports on remontées-mécaniques.net, and was intrigued by all of the old lifts relocated from far away. I found a Riblet double with unique tower heads and a strangely-refurbished drive terminal, an old Poma double with SACMI sheaves that must have been moved from Europe, and a second-generation Montaz-Mautino double that was again bought secondhand from Europe.
This has made me wonder:

1) Have any lifts been relocated from North America to Europe or vice versa?
2) Have any relocated lifts kept their old name?

Also, speaking of South America, I found these reports on ski lifts №2 and №3 at Pucon, Chile. The manufacturer is listed as Riblet, although the only Riblet parts I can see in the lifts are the insert grips. The chairs are clearly Ski Lift International, and the towers seem to be Doppelmayr but I am not 100% sure. Does anybody know the manufacturer of certain parts?

#2 liftmech

    lift mechanic

  • Administrator II
  • 5,891 Posts:
  • Interests:Many.

Posted 10 February 2015 - 09:41 AM

The Riblets at Pucon are, as far as I know, original installations. Riblet did sell lifts down there.
Member, Department of Ancient Technology, Colorado chapter.

#3 Peter

    Established User

  • Member
  • 4,314 Posts:

Posted 10 February 2015 - 07:11 PM

View Postpassengerpigeon, on 10 February 2015 - 03:30 AM, said:

Hello,
1) Have any lifts been relocated from North America to Europe or vice versa?

I believe the 2nd gondola at Big Sky was relocated from somewhere in Europe.
- Peter<br />
Liftblog.com

#4 Backbowlsbilly

    Established User

  • Member
  • 251 Posts:

Posted 10 February 2015 - 07:27 PM

Crested Butte's original gondola was too, I think from Italy, but it was removed a few years later because of some issues with it. (http://www.chairlift...estedbutte.html)

#5 2milehi

    Established User

  • Industry II
  • 1,018 Posts:
  • Interests:Makin' sparks, breakin' part

Posted 12 February 2015 - 02:51 PM

I bet some chairs would hit the ground with a fully loaded lift and an E-Stop in that long span.

Posted Image
Anything is possible when you don't understand what you are talking about.

#6 RibStaThiok

    Established User

  • Member
  • 1,057 Posts:

Posted 12 February 2015 - 07:15 PM

sure was a pretty lift though..
Ryan

#7 boardski

    Established User

  • Industry II
  • 760 Posts:

Posted 12 February 2015 - 08:29 PM

Some of the towers were lattice style- might have been reused from the former gondola. The old Silver Queen also had a noticeable roll-back when it was stopped. Nothing dangerous but definitely noticeable. The lift was very similar to Copper's "F-Lift" except the chairs were black and Copper's chairs were white. The window part could separate from the footrest part which had the lower part of the canopy mounted on it. The newer designs started by the former "Vista Bahn" at Vail were better since the footrests did not have any of the canopy paneling mounted to them. Unique lifts, did any lucky individual end up with an old chair from either of those lifts (Old Silver Queen or 'F' Lift)?
Skiing since 1977, snowboarding since 1989





1 User(s) are reading this topic

0 members, 1 guests, 0 anonymous users