Jump to content


Homemade Private Chair Lift


8 replies to this topic

#1 Nor'eastSkier

    Established User

  • Member
  • 68 Posts:

Posted 21 February 2019 - 10:59 AM

https://www.youtube....h?v=i2zSJYOpTUM

Saw this a while back and recently came across it again. Anyone have any clue how he's legally able to keep this operating in a fairly public manner (as in, he posts a decent number of videos with the lift included)? I believe it's in Cali near Tahoe, so I'd have to imagine regulations are pretty tight.

Mainly just curious as I'm daydreaming about building something similar in the distant future.

Thanks!

#2 Vincen

    Established User

  • Member
  • 33 Posts:
  • Interests:ski lifts and resorts

Posted 21 February 2019 - 10:46 PM

Well so long it's on a private land and for it's own exclusive use I guess you can do nearly what you want ;)

#3 william b

    Established User

  • Industry II
  • 122 Posts:

Posted 22 February 2019 - 05:27 AM

Every state is different, of course. In New Hampshire, any tramway installation (including private) needs to be approved by the New Hampshire Passenger Tramway Safety Board; design and construction to be certified by a NH licensed engineer to meet current standards.

wbl

#4 sheave

    Established User

  • Industry II
  • 112 Posts:
  • Interests:History

Posted 18 March 2019 - 09:26 AM

There is another private lift in the making, but it's down under: https://www.facebook...77578276377476/

#5 NHskier13

    Established User

  • Member
  • 567 Posts:
  • Interests:Yes

Posted 18 March 2019 - 08:17 PM

Was looking up trying to find literature about NH tramway safety standards per what william b said. I think if you're after specifics you want section 300 here : http://www.gencourt....encies/pas.html
Some of the forms that go with lifts in NH : https://www.nh.gov/s.../documents.html

But yeah between the lack of any way to stop/start the lift other than interacting with that motor, the carrier with no safety bar (or backrest lol) using what appears to be surface lift towers (narrow line gauge) and wheels for a chairlift (not a huge problem if it's just you there, but it might go against the grain for regulations designed around lifts that move hundreds) that chair would probably not see approval here, and assuming other new england states are as strict as here, you'd have to move pretty far to do it.

Just some stuff I found I thought you'd be interested in reading.

#6 Bogong

    Established User

  • Member
  • 205 Posts:
  • Interests:Corrupting society, Australian ski history, Backcountry and resort skiing, mountaineering, extended hikes, making ski resorts viable summer destinations.

Posted 25 March 2019 - 05:51 PM

View Postsheave, on 18 March 2019 - 09:26 AM, said:

There is another private lift in the making, but it's down under: https://www.facebook...77578276377476/

He is the manager of an engineering company and used to work at Falls Creek ski resort. Almost all the parts are being fabricated by his own company, so it isn't as expensive as it looks. The hill behind his house only rarely gets a light dusting of snow, so he won't be using it for skiing, he just likes chairlifts, so he is building one for his own amusement.
Details of every Australian ski lift ever built. http://www.australia...ralianskilifts/

#7 vons

    Established User

  • Industry II
  • 940 Posts:

Posted 28 March 2019 - 02:35 PM

Looks like some mountain biking could be done off of it.

#8 sheave

    Established User

  • Industry II
  • 112 Posts:
  • Interests:History

Posted 31 March 2019 - 03:21 AM

View PostBogong, on 25 March 2019 - 05:51 PM, said:

He is the manager of an engineering company and used to work at Falls Creek ski resort. Almost all the parts are being fabricated by his own company, so it isn't as expensive as it looks. The hill behind his house only rarely gets a light dusting of snow, so he won't be using it for skiing, he just likes chairlifts, so he is building one for his own amusement.

Plus he is a very nice guy and very responsive, too.

#9 Petz

    Established User

  • Member
  • 80 Posts:
  • Interests:Old ropeways, technics, modelling

Posted 04 December 2019 - 02:38 PM

I´m able to present a further one that i had built for an alpinform.com friend in 2018/19.
The 1Clf is a short but passenger usable showpiece built mostly from skilift scrap parts (Stemag, Doppelmayr, Girak, Wiener Brückenbau) that the owner collected since his youth. Rather unique 3 KW electric drive using a motorcycle chain as bullwheel connection to provide a heavy gear. Buildings, concrete foundations and all the lovely optical gimmicks had been done by the owner itselves.
Construction pictures can be seen here and at the following pages:

https://www.alpinfor...23044&start=175

Three videolinks; two filmed by me:

https://de.youtube.c...h?v=Ae1cwRtYtdY

Test using a Doppelmayr 1WN skilift hanger:

https://de.youtube.c...h?v=W7OUHuZ5PvI

Video from my friend Tobi:

https://de.youtube.c...h?v=aG_8R2Pnxq4

Attached File(s)


Best regards, Markus
"You have to pay for the experiences during your life - sometimes youŽll get some discount" (Oskar Kokoschka)
My german modelchairliftpage:
www.modellseilbahnen.com





1 User(s) are reading this topic

0 members, 1 guests, 0 anonymous users