Jump to content


Looking for Riblet Link-Belt brake band & detensioner rams


4 replies to this topic

#1 JohnRW

    Established User

  • Industry II
  • 151 Posts:

Posted 26 August 2019 - 09:24 AM

Hi all,

We need a replacement Link-Belt brake band for our Riblet lift. Also looking at upgrading to a Formsprag, but figured I'd see if anyone has a Link-Belt sitting around in good condition.

Also looking for replacement rams on our Superior Tramway detensioner. Hydraulic shop says they probably won't be able to re-seal them again. Unfortunately they're not available off the shelf, and sounds like it's really expensive to have them made. If anyone has one of these sitting around, we'd prefer to buy just the rams, but would consider the entire apparatus.

Thanks,
John

#2 bblifts

    New User

  • Industry II
  • 17 Posts:

Posted 26 August 2019 - 01:26 PM

Is it the detensioner with 2 rams for clamping and 2 hollow rams for making the basket?
If so I'm pretty sure I bought some "off the shelf" several years ago.
I'll dig around and see if I can find where we got them.

#3 JohnRW

    Established User

  • Industry II
  • 151 Posts:

Posted 26 August 2019 - 01:53 PM

View Postbblifts, on 26 August 2019 - 01:26 PM, said:

Is it the detensioner with 2 rams for clamping and 2 hollow rams for making the basket?
If so I'm pretty sure I bought some "off the shelf" several years ago.
I'll dig around and see if I can find where we got them.


Yes, that's the correct type. Let me know if you can dig up that info - would much prefer to be able to purchase new somewhere!

#4 ghee

    New User

  • Industry II
  • 12 Posts:

Posted 27 August 2019 - 03:03 PM

View PostJohnRW, on 26 August 2019 - 09:24 AM, said:

Hi all,

We need a replacement Link-Belt brake band for our Riblet lift. Also looking at upgrading to a Formsprag, but figured I'd see if anyone has a Link-Belt sitting around in good condition.

Also looking for replacement rams on our Superior Tramway detensioner. Hydraulic shop says they probably won't be able to re-seal them again. Unfortunately they're not available off the shelf, and sounds like it's really expensive to have them made. If anyone has one of these sitting around, we'd prefer to buy just the rams, but would consider the entire apparatus.

Thanks,
John

email me your info ill see what we have left from our detentioner
mschooley@grandtarghee.com

#5 JohnRW

    Established User

  • Industry II
  • 151 Posts:

Posted 28 August 2019 - 10:43 AM

View Postghee, on 27 August 2019 - 03:03 PM, said:

email me your info ill see what we have left from our detentioner
mschooley@grandtarghee.com


Will do - thanks!





7 User(s) are reading this topic

0 members, 7 guests, 0 anonymous users