Cable Catch
Snoqualmie guy
14 Oct 2007
Outback
23 Oct 2007
rniemi
29 Oct 2009
Allan, on 12 August 2007 - 08:28 PM, said:
Boy did I get questioned when I wrote that on the report! Ahh hindsight = 20/20 - must remember not to offer too much information!
Anyways - what are these things I've circled in the picture? Are they rope catchers of sorts??
Anyways - what are these things I've circled in the picture? Are they rope catchers of sorts??
Hi Allan,
Extreme late reply (by two years!), but I think none of the replies figured out the purpose of the pipes you circled in that photo. Take a look how the bullwheel carriage is suspended from the tube above. There's nothing keeping the bullwheel carriage level other than the position of the rope on the incoming and outgoing side. I think the tubes you circled catch on the rope during a deropement so the bullwheel carriage doesn't tip too far along the axis of the tube above the carriage.
-Ryan
Allan
29 Oct 2009
rniemi, on 29 October 2009 - 04:09 AM, said:
Hi Allan,
Extreme late reply (by two years!), but I think none of the replies figured out the purpose of the pipes you circled in that photo. Take a look how the bullwheel carriage is suspended from the tube above. There's nothing keeping the bullwheel carriage level other than the position of the rope on the incoming and outgoing side. I think the tubes you circled catch on the rope during a deropement so the bullwheel carriage doesn't tip too far along the axis of the tube above the carriage.
-Ryan
Extreme late reply (by two years!), but I think none of the replies figured out the purpose of the pipes you circled in that photo. Take a look how the bullwheel carriage is suspended from the tube above. There's nothing keeping the bullwheel carriage level other than the position of the rope on the incoming and outgoing side. I think the tubes you circled catch on the rope during a deropement so the bullwheel carriage doesn't tip too far along the axis of the tube above the carriage.
-Ryan
There are actually side rollers on the carriage that run along the box beam welded to the bottom of the tube.

