New Lift Construction Photos 2009
skisox34
17 Sep 2009
Went up to Middlebury Snowbowl again. The tower foundations are dug and the molds are set for the concrete pour.
Attached File(s)
-
img0159.jpg (272.18K)
Number of downloads: 33 -
img0370.jpg (276.47K)
Number of downloads: 43 -
img0573.jpg (286.73K)
Number of downloads: 39 -
img0272.jpg (239.02K)
Number of downloads: 43 -
img0909.jpg (218.66K)
Number of downloads: 35
hoodoo
19 Sep 2009
Marmot Basin, Jasper AB..
Also, I believe Poma just signed another small lift in Quebec that they will start on Oct. as well as a lift in France from POA....
DSC_1983sm.JPG (109.68K)
Number of downloads: 52
DSC_1991sm.JPG (194.58K)
Number of downloads: 68
DSC_2001sm.JPG (159.17K)
Number of downloads: 61
DSC_2006sm.JPG (98.63K)
Number of downloads: 52
DSC_2017sm.JPG (167.26K)
Number of downloads: 61
DSC_2037sm.JPG (187.97K)
Number of downloads: 52
Also, I believe Poma just signed another small lift in Quebec that they will start on Oct. as well as a lift in France from POA....
DSC_1983sm.JPG (109.68K)
Number of downloads: 52
DSC_1991sm.JPG (194.58K)
Number of downloads: 68
DSC_2001sm.JPG (159.17K)
Number of downloads: 61
DSC_2006sm.JPG (98.63K)
Number of downloads: 52
DSC_2017sm.JPG (167.26K)
Number of downloads: 61
DSC_2037sm.JPG (187.97K)
Number of downloads: 52
skiersage
19 Sep 2009
On a related note, does anyone know if this years Leitner Poma detachable lifts are going to be omegas? I remember that there was suppose to be a new terminal design coming out soon. Will we see one of those this year?
Peter
19 Sep 2009
skiersage, on 19 September 2009 - 03:56 PM, said:
On a related note, does anyone know if this years Leitner Poma detachable lifts are going to be omegas? I remember that there was suppose to be a new terminal design coming out soon. Will we see one of those this year?
There are only two, at Marmot Basin and Nakiska and both are the same as the detachables of the past few years.
Lift Dinosaur
20 Sep 2009
skiersage, on 19 September 2009 - 03:56 PM, said:
On a related note, does anyone know if this years Leitner Poma detachable lifts are going to be omegas? I remember that there was suppose to be a new terminal design coming out soon. Will we see one of those this year?
Yes...
and No.
Possibly next year for the LPA grip and terminal.
Dino
floridaskier
23 Sep 2009
Since when does CTEC use those types of four-point tower footings on new lifts? I thought they moved to the later round type in the early 90s
hoodoo
26 Sep 2009
More Marmot Basin...
They purchased the AC drive. Cummins has also re-designed the muffler to make it more quiet, I believe this is the first one.
The cedar under skin comes with lift as well as the insulated terminal roof.
The new lift looks like a transformer next to the older lift...
006sm.JPG (104.98K)
Number of downloads: 91
008sm.JPG (127K)
Number of downloads: 119
015sm.JPG (65.67K)
Number of downloads: 124
028sm.JPG (92.49K)
Number of downloads: 131
030sm.JPG (114.12K)
Number of downloads: 157
035sm.JPG (92.02K)
Number of downloads: 166
040sm.JPG (96.23K)
Number of downloads: 139
They purchased the AC drive. Cummins has also re-designed the muffler to make it more quiet, I believe this is the first one.
The cedar under skin comes with lift as well as the insulated terminal roof.
The new lift looks like a transformer next to the older lift...
006sm.JPG (104.98K)
Number of downloads: 91
008sm.JPG (127K)
Number of downloads: 119
015sm.JPG (65.67K)
Number of downloads: 124
028sm.JPG (92.49K)
Number of downloads: 131
030sm.JPG (114.12K)
Number of downloads: 157
035sm.JPG (92.02K)
Number of downloads: 166
040sm.JPG (96.23K)
Number of downloads: 139
LuvPow
27 Sep 2009
Crew pic from Marmot; Fly day
Poma Crew MB 001sm.jpg (138.13K)
Number of downloads: 90
This post has been edited by LuvPow: 27 September 2009 - 09:32 AM
Poma Crew MB 001sm.jpg (138.13K)
Number of downloads: 90
This post has been edited by LuvPow: 27 September 2009 - 09:32 AM
LuvPow
27 Sep 2009
Lift Dinosaur
27 Sep 2009
vons
05 Oct 2009
a fly day in France by the BMF crew http://www.dailymoti...-vlm-2009_sport
On a side note please attach the pictures to your post don't insert them, that way I(and other bandwidth limited persons) don't have to wait 5 min for your huge picture to load unless I/we decide to view it. the huge pictures may be why the editor won't open up the link insert feature today... or my computer is just loosing it.
On a side note please attach the pictures to your post don't insert them, that way I(and other bandwidth limited persons) don't have to wait 5 min for your huge picture to load unless I/we decide to view it. the huge pictures may be why the editor won't open up the link insert feature today... or my computer is just loosing it.
Peter
08 Oct 2009
First cabin on the Roundhouse Gondola heads up Baldy:
http://link.brightco...tid=44009092001
http://link.brightco...tid=44009092001
Outback
14 Oct 2009
LuvPow
16 Oct 2009
skiersage
18 Oct 2009
A Partek double double being constructed at Big Bear PA. This picture is from their website and there are many more there. Check them out.
http://www.ski-bigbear.com/home/
http://www.ski-bigbear.com/home/
Attached File(s)
-
bigbeardub.JPG (33.11K)
Number of downloads: 58
SkiBachelor
18 Oct 2009
skiersage, on 18 October 2009 - 08:55 PM, said:
A Partek double double being constructed at Big Bear PA. This picture is from their website and there are many more there. Check them out.
http://www.ski-bigbear.com/home/
http://www.ski-bigbear.com/home/
Does anyone happen to know where this Partek came from?
Peter
19 Oct 2009
It's unlikely it came from anywhere. There are no Partek double-doubles that have been removed. As I've said before, it sure seems like Ski Lift Parts Inc. is still making brand new lifts.


