Pictures of a detensioned lift
Jonni
04 Jul 2008
Doing kind of the same thing:

Although, we are in the process of lowering it here.

Although, we are in the process of lowering it here.
lastchair_44
05 Jul 2008
What are you guys doing?? Just checking bearings or replacing them? Planetary/Reducers? Are you guys checking all your BW bearings after the incident this season? Looks like fun!
Allan
05 Jul 2008
Jonni
05 Jul 2008
We are replacing the bushings, bullwheel liner, and gearbox seal. It's been a fun project, but Mountain Ops has been beginning to complain that we are using their excavator too long:

:)

:)
liftmech
07 Jul 2008
We'll hopefully be doing that to the Eagle this fall, not set in stone yet but more than likely.
vons
07 Jul 2008
you guys love dropping the eagle drive BW atleast it is not a 36hour turnaround this time
liftmech
10 Jul 2008
And it won't be 20 below, either 
Jonni- you have worn bushings in that coupling or just replacing them since it's on the ground?
Jonni- you have worn bushings in that coupling or just replacing them since it's on the ground?
Jonni
03 Aug 2008
Sorry I haven't been on in a while, but we are replacing the bushings due to being worn (as well as a bit of a funny noise that they were making toward the end of the season). We talked with the guys from POMA and they suggested it was the bushing, so we felt as a way to kill two birds with one stone, the cable needed to be respliced anyway, so we did both. After about 6 weeks and one failed attempt at putting it back on due to the shaft heating up too fast, the bullwheel is back in place and the cable is back on it.
Allan
09 Aug 2008
More detensioning! Bullwheel comes off this week; and a resplice sometime soon!
Attached File(s)
-
IMG_0887.jpg (714.86K)
Number of downloads: 70 -
IMG_0889.jpg (795.3K)
Number of downloads: 49 -
IMG_0863.jpg (624.68K)
Number of downloads: 42
RibStaThiok
09 Aug 2008
Looks like it is time for some new paint on the towers. Hows the weather been up there?
Allan
09 Aug 2008
RibStaThio, on Aug 9 2008, 02:42 PM, said:
Looks like it is time for some new paint on the towers. Hows the weather been up there?
Weather's been awesome the past month or so - a little thundery the last couple of days. The paint on this lift is pretty good; the rust spots you see will be touched up - they're mostly from the snowboarders.
RibStaThiok
09 Aug 2008
Very nice! Man I miss it up there. Maybe next summer I can take a vacation in that neck of the woods. Is that the lift which is getting replaced next year?
mikest2
12 Aug 2008
Allan
12 Aug 2008
Hey, outta my topic! Just kidding!
What's going on with the Gondola's return? The pass pic is great Mike!
Attached File(s)
-
IMG_0897.jpg (668.76K)
Number of downloads: 44
mikest2
12 Aug 2008
Allan, on Aug 12 2008, 09:04 PM, said:
Hey, outta my topic! Just kidding!
What's going on with the Gondola's return? The pass pic is great Mike!
On startup she kind of hesitated, then snapped into action. The bearings looked pretty good, I think it may have been water getting in and freezing up overnight. Aw well, bearings are cheap, cranes are not.
Lift Kid
13 Aug 2008
I know it is really off topic, but I really like those Leitner terminals. They look very cool, and I also really think the rocks on the concrete supports look good.
Andoman
13 Aug 2008
Lift Kid, on Aug 13 2008, 01:32 PM, said:
I know it is really off topic, but I really like those Leitner terminals. They look very cool, and I also really think the rocks on the concrete supports look good.
I agree with both statements, but i would think the upkeep on veneer stone would be high on a structure that receives live loads like a chairlift support. Yes yes i know
Allan
19 Aug 2008
Another lift rigged down... and another bullwheel in the shop! There's so much ribbon on the rigging as it crosses a road, there's lots of dirtbikers and drunken shenanigans.
Attached File(s)
-
IMG_0945.jpg (741.8K)
Number of downloads: 41 -
IMG_0948.jpg (309.16K)
Number of downloads: 45
RibStaThiok
20 Aug 2008
Ahhh the old 71 T-Bird. er Bar. Kinda hard to see, but looks like she may be ready for a new liner?
Allan
20 Aug 2008
RibStaThio, on Aug 20 2008, 07:06 PM, said:
Ahhh the old 71 T-Bird. er Bar. Kinda hard to see, but looks like she may be ready for a new liner?
Now if we could only get the shaft out of the carriage. Liner is new in 05 - but the rope seems to be riding a bit low, so we're going to set the guide sheaves up with our new digital level!

