←  Skilifts.org Technical Discussions

Skilifts.org / SORT Forum

»

Pictures of a detensioned lift

Jonni's Photo Jonni 04 Jul 2008

Doing kind of the same thing:

Posted Image

Although, we are in the process of lowering it here.
Reply

lastchair_44's Photo lastchair_44 05 Jul 2008

What are you guys doing?? Just checking bearings or replacing them? Planetary/Reducers? Are you guys checking all your BW bearings after the incident this season? Looks like fun!
Reply

Allan's Photo Allan 05 Jul 2008

View Postlastchair_44, on Jul 5 2008, 07:19 AM, said:

Are you guys checking all your BW bearings after the incident this season?


That's why we're doing it! We're doing every return except the new lift!
Reply

Jonni's Photo Jonni 05 Jul 2008

We are replacing the bushings, bullwheel liner, and gearbox seal. It's been a fun project, but Mountain Ops has been beginning to complain that we are using their excavator too long:

Posted Image

:)
Reply

liftmech's Photo liftmech 07 Jul 2008

We'll hopefully be doing that to the Eagle this fall, not set in stone yet but more than likely.
Reply

vons's Photo vons 07 Jul 2008

you guys love dropping the eagle drive BW atleast it is not a 36hour turnaround this time :smile:
Reply

liftmech's Photo liftmech 10 Jul 2008

And it won't be 20 below, either :devil:

Jonni- you have worn bushings in that coupling or just replacing them since it's on the ground?
Reply

Jonni's Photo Jonni 03 Aug 2008

Sorry I haven't been on in a while, but we are replacing the bushings due to being worn (as well as a bit of a funny noise that they were making toward the end of the season). We talked with the guys from POMA and they suggested it was the bushing, so we felt as a way to kill two birds with one stone, the cable needed to be respliced anyway, so we did both. After about 6 weeks and one failed attempt at putting it back on due to the shaft heating up too fast, the bullwheel is back in place and the cable is back on it.
Reply

Allan's Photo Allan 09 Aug 2008

More detensioning! Bullwheel comes off this week; and a resplice sometime soon!

Attached File(s)

Reply

RibStaThiok's Photo RibStaThiok 09 Aug 2008

Looks like it is time for some new paint on the towers. Hows the weather been up there?
Reply

Allan's Photo Allan 09 Aug 2008

View PostRibStaThio, on Aug 9 2008, 02:42 PM, said:

Looks like it is time for some new paint on the towers. Hows the weather been up there?


Weather's been awesome the past month or so - a little thundery the last couple of days. The paint on this lift is pretty good; the rust spots you see will be touched up - they're mostly from the snowboarders.
Reply

RibStaThiok's Photo RibStaThiok 09 Aug 2008

Very nice! Man I miss it up there. Maybe next summer I can take a vacation in that neck of the woods. Is that the lift which is getting replaced next year?
Reply

mikest2's Photo mikest2 12 Aug 2008

Lara's Gondola Return................

Attached File  hvreturn.jpg (42.26K)
Number of downloads: 86
Reply

Allan's Photo Allan 12 Aug 2008

Hey, outta my topic! Just kidding! :smile: What's going on with the Gondola's return? The pass pic is great Mike!

Attached File(s)

Reply

mikest2's Photo mikest2 12 Aug 2008

View PostAllan, on Aug 12 2008, 09:04 PM, said:

Hey, outta my topic! Just kidding! :smile: What's going on with the Gondola's return? The pass pic is great Mike!

On startup she kind of hesitated, then snapped into action. The bearings looked pretty good, I think it may have been water getting in and freezing up overnight. Aw well, bearings are cheap, cranes are not.
Reply

Lift Kid's Photo Lift Kid 13 Aug 2008

I know it is really off topic, but I really like those Leitner terminals. They look very cool, and I also really think the rocks on the concrete supports look good.
Reply

Andoman's Photo Andoman 13 Aug 2008

View PostLift Kid, on Aug 13 2008, 01:32 PM, said:

I know it is really off topic, but I really like those Leitner terminals. They look very cool, and I also really think the rocks on the concrete supports look good.



I agree with both statements, but i would think the upkeep on veneer stone would be high on a structure that receives live loads like a chairlift support. Yes yes i know :offtopic:
Reply

Allan's Photo Allan 19 Aug 2008

Another lift rigged down... and another bullwheel in the shop! There's so much ribbon on the rigging as it crosses a road, there's lots of dirtbikers and drunken shenanigans.

Attached File(s)

Reply

RibStaThiok's Photo RibStaThiok 20 Aug 2008

Ahhh the old 71 T-Bird. er Bar. Kinda hard to see, but looks like she may be ready for a new liner?
Reply

Allan's Photo Allan 20 Aug 2008

View PostRibStaThio, on Aug 20 2008, 07:06 PM, said:

Ahhh the old 71 T-Bird. er Bar. Kinda hard to see, but looks like she may be ready for a new liner?


Now if we could only get the shaft out of the carriage. Liner is new in 05 - but the rope seems to be riding a bit low, so we're going to set the guide sheaves up with our new digital level!
Reply