Attached File(s)
-
Peak_to_Peak_Gondola_Construction_2008_06_07_164500.jpg (651.33K)
Number of downloads: 113
This post has been edited by Skier: 07 June 2008 - 05:42 PM
1
New Lift Construction Photos 2008
Started by Peter, Mar 24 2008 04:39 PM
465 replies to this topic
#61
-
- Member
- 4,314 Posts:
Established User
Posted 07 June 2008 - 04:30 PM
Tower 1 is going up on Blackcomb. The cable for Emerald Express is on the ground, presumably to accomodate P2P constructon. Also, the crossarm and lifting frame of a tower have been removed.
- Peter<br />
Liftblog.com
Liftblog.com
#62
-
- Industry I
- 3 Posts:
New User
- Interests:Snow, and anything to do with snow.
Posted 09 June 2008 - 08:49 PM
floridaskier, on Jun 1 2008, 08:20 AM, said:
Doesn't look like anything's happened yet for Ski Team at PCMR. The snow is gone from the base area, but the old lift is still there and all the summer stuff is up at the base area. Wonder where the bottom terminal is going, there's not much extra space down there
http://www.parkcitymountain.com/winter/con...cams/index.html
http://www.parkcitymountain.com/winter/con...cams/index.html
Base is next to the base building for the alpine coaster. If you thought PC was ridiculous for traffic congestion, this will make that area just that much tighter. But another lift out of the base area is much needed.
#63
-
- Member
- 4,314 Posts:
Established User
Posted 11 June 2008 - 09:48 PM
The old chair 7 and the new Chondola lift line at Sunday River:
Attached File(s)
-
gallery_1_67_106174.jpg (193.37K)
Number of downloads: 71
- Peter<br />
Liftblog.com
Liftblog.com
#64
-
- Member
- 4,314 Posts:
Established User
Posted 12 June 2008 - 02:00 PM
Here is the new Mountaineer Skyride at the Cheyenne Mountain Zoo in Colorado Springs. It is a Doppelmayr quad that is 1100 feet long and it just opened.
Attached File(s)
-
2498293420054971943qxWGXl_fs.jpg (797.83K)
Number of downloads: 95
- Peter<br />
Liftblog.com
Liftblog.com
#66
-
- Administrator I
- 2,814 Posts:
Established User
Posted 12 June 2008 - 06:10 PM
Skier, on Jun 12 2008, 06:00 PM, said:
Here is the new Mountaineer Skyride at the Cheyenne Mountain Zoo in Colorado Springs. It is a Doppelmayr quad that is 1100 feet long and it just opened.
Surprising how many lifts are still built with the CTEC chairs
- Tyler
West Palm Beach, FL - elev. 9 feet
West Palm Beach, FL - elev. 9 feet
#67
-
- Industry I
- 1,626 Posts:
Established User
Posted 12 June 2008 - 06:13 PM
Snoqualmie guy, on Jun 12 2008, 02:32 PM, said:
Is it a flat lift or does it have any vertical rise?
Its been a while since I have been to the Zoo but from previous visits I would estimate 150-200 feet max.
I should go next time I'm visiting family in the springs as they have a membership to the zoo.
This post has been edited by poloxskier: 12 June 2008 - 06:14 PM
-Bryan
Theres a place for all of God's creatures, right next to the mashed potatoes.
"You could say that a mountain is alot like a woman, once you think you know every inch of her and you're about to dip your skis into some soft, deep powder...Bam, you've got two broken legs, cracked ribs and you pay your $20 just to let her punch your lift ticket all over again"
Theres a place for all of God's creatures, right next to the mashed potatoes.
"You could say that a mountain is alot like a woman, once you think you know every inch of her and you're about to dip your skis into some soft, deep powder...Bam, you've got two broken legs, cracked ribs and you pay your $20 just to let her punch your lift ticket all over again"
#69
-
- Member
- 4,314 Posts:
Established User
Posted 17 June 2008 - 09:27 AM
I just read that Bear Creek, PA is getting a new fixed grip quad this summer. I went to there website and looked at their camera, and the lift is just about to be spliced!
Attached File(s)
This post has been edited by Skier: 17 June 2008 - 09:27 AM
- Peter<br />
Liftblog.com
Liftblog.com
#71
-
- Member
- 4,314 Posts:
Established User
Posted 17 June 2008 - 01:10 PM
This is actually Bear Creek's 2nd quad. I assume when you learned there it was Doe Mountain.
- Peter<br />
Liftblog.com
Liftblog.com
#72
-
- Member
- 1,484 Posts:
Established User
- Interests:Skiing, sailing, music.
Posted 17 June 2008 - 01:48 PM
More Keystone Construction Pics!!
The tower heads and assemblies have arrived!! It looks like there will be 32 towers with 2 compression towers (probably bottom and mid stations) and a good number of combination towers. Also there are quite a few parts in the gated lot for the bottom station.
Tower pics:
My first thought of the assemblies was just their sheer size. I always thought that sheaves were just little wheels and that catwalks were impossible to walk on unless you're a gymnast. Man was I wrong!
A 10-sheave support assembly:
You think cable catchers are small...
A 4S/4C combination assembly:
Tower head for #14 which will be a 10-support assembly:
An 8S/8C combination assembly - BIG:
A 16-sheave compression assembly. I measured it out to be almost 30 feet long!!
Tower head for #32, the last tower. It will be a 10-support assembly:
Various mounted tower heads:
The tower heads and assemblies have arrived!! It looks like there will be 32 towers with 2 compression towers (probably bottom and mid stations) and a good number of combination towers. Also there are quite a few parts in the gated lot for the bottom station.
Tower pics:
My first thought of the assemblies was just their sheer size. I always thought that sheaves were just little wheels and that catwalks were impossible to walk on unless you're a gymnast. Man was I wrong!
A 10-sheave support assembly:
You think cable catchers are small...
A 4S/4C combination assembly:
Tower head for #14 which will be a 10-support assembly:
An 8S/8C combination assembly - BIG:
A 16-sheave compression assembly. I measured it out to be almost 30 feet long!!
Tower head for #32, the last tower. It will be a 10-support assembly:
Various mounted tower heads:
-Matt
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
#73
-
- Member
- 1,484 Posts:
Established User
- Interests:Skiing, sailing, music.
Posted 17 June 2008 - 01:55 PM
A mounted combination assembly:
A cable position sensor:
There's a piece of wood inside this sheave. Why?
Complete tower 9 and 10. Like I said before, they're gonna be big. I measured them out at over 100 feet each!
What are these things that look like a satellite solar panel for?
The bottom station:
Various bottom station parts:
You can see the bullwheel in its quarters before they bolt it on to the center.
The center of the bullwheel:
A cable position sensor:
There's a piece of wood inside this sheave. Why?
Complete tower 9 and 10. Like I said before, they're gonna be big. I measured them out at over 100 feet each!
What are these things that look like a satellite solar panel for?
The bottom station:
Various bottom station parts:
You can see the bullwheel in its quarters before they bolt it on to the center.
The center of the bullwheel:
This post has been edited by skierdude9450: 17 June 2008 - 02:01 PM
-Matt
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
#74
-
- Member
- 1,484 Posts:
Established User
- Interests:Skiing, sailing, music.
Posted 17 June 2008 - 01:56 PM
The hydraulic tensioning arms:
The acceleration (or deceleration) zone:
That's all for now.
P.S. why can you only post 8 pictures at a time??
The acceleration (or deceleration) zone:
That's all for now.
P.S. why can you only post 8 pictures at a time??
This post has been edited by skierdude9450: 17 June 2008 - 02:00 PM
-Matt
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
"Today's problems cannot be solved by the level of thinking that created them." -Albert Einstein
#77
-
- Administrator I
- 858 Posts:
SAM student
Posted 17 June 2008 - 04:26 PM
Quote
A few weeks ago the chairs from lift 7 were loaded onto a flatbed on their way to Boyne Highlands in Michigan.
That is kind of funny. Before I read this I was thinking to myself "I bet they send that lift to Boyne Highlands". Boyne H has not had a new lift in a few years and with Nubs getting a new lift this year, it is obviously time for an addition.
-Sage
If life gives you lemons, make lemonade. And then find someone whose life is giving them vodka and have a party.
-Ron White
If life gives you lemons, make lemonade. And then find someone whose life is giving them vodka and have a party.
-Ron White
#78
-
- Member
- 216 Posts:
Established User
Posted 17 June 2008 - 08:34 PM
skiersage, on Jun 17 2008, 07:26 PM, said:
That is kind of funny. Before I read this I was thinking to myself "I bet they send that lift to Boyne Highlands". Boyne H has not had a new lift in a few years and with Nubs getting a new lift this year, it is obviously time for an addition.
What in the world is Boyne H going to do with this lift? I don't know where they'd expand to and I don't know what lift they might replace or upgrade.
#79
-
- Administrator I
- 858 Posts:
SAM student
Posted 18 June 2008 - 06:43 AM
nathanvg, on Jun 18 2008, 12:34 AM, said:
What in the world is Boyne H going to do with this lift? I don't know where they'd expand to and I don't know what lift they might replace or upgrade.
I am 90% sure that they will use this lift to expand the north face area. I know that they have wanted to put another lift back there to the right of the current quad for a while.
-Sage
If life gives you lemons, make lemonade. And then find someone whose life is giving them vodka and have a party.
-Ron White
If life gives you lemons, make lemonade. And then find someone whose life is giving them vodka and have a party.
-Ron White
#80
-
- Administrator II
- 5,918 Posts:
lift mechanic
- Interests:Many.
Posted 18 June 2008 - 06:21 PM
Quote
A cable position sensor:
Not quite. If you notice the black plastic block there, you'll see that it has a hole in the centre where the sensor will go once the lift is (mostly) finished. That way they don't get damaged in transit, either on the road or in the air.
Quote
There's a piece of wood inside this sheave. Why?
Probably to keep the sheave from rotating, for whatever reason.
Nice photos.
Member, Department of Ancient Technology, Colorado chapter.
11 User(s) are reading this topic
0 members, 11 guests, 0 anonymous users
