New Lift Construction Photos 2007
skierdude9450
06 Nov 2007
I can't believe that that one crane thing is still on it's side!

Limelight
06 Nov 2007
Well I'll be damned! They got the towers in. Thank God, because I've been really looking forward to skiing it this year. Looks like they had great flying weather too. Skier, great job on the photos!
Peter
06 Nov 2007
skierdude9450, on Nov 6 2007, 08:05 AM, said:
I can't believe that that one crane thing is still on it's side! 

I was told that they rented it from a company that had it brought over from Austria, but Crystal got insurance on the rental so the rental company is somehow responsible for getting it out. The rental company was just going to pay the Chinook Helicopter a little extra money to lift out the machine while the towers were being done. When the Chinook failed to show up 3 times, Crystal brought in the smaller K-Max instead so the Spider is there for the long haul I guess. There is a tarp over some of it and cables holding it in place.
Guest_mjturley34_* 06 Nov 2007




Phoenix
07 Nov 2007
Here is the latest video from Heavenly showing the installation of the towers for Olympic Express.
Olympic Express Construction Continues
Olympic Express Construction Continues
EagleAce
07 Nov 2007

Peter
09 Nov 2007
http://www.skiwinterpark.com/mountain/impr..._video_tour.htm
A video of the ride up the new lift at Winter Park
A video of the ride up the new lift at Winter Park
Jonni
12 Nov 2007
Some sweet pictures of the two new Dopps going in at Loon Mountain:
http://www.snowjourn...?cid=topic12121 Scroll down
I believe that telemechanique is a poster here as well under a different name.
http://www.snowjourn...?cid=topic12121 Scroll down
I believe that telemechanique is a poster here as well under a different name.
SuperRat
12 Nov 2007
Telemechanic = SuperRat (or a telemarking mechanic)
Telemecanique = another guy (or a switch commonly used in Doppelmayr detachables)
Telemecanique = another guy (or a switch commonly used in Doppelmayr detachables)
SuperRat
12 Nov 2007
Direct link to my latest loon construction gallery: http://www.snowjourn...cid=gallery5894
skiersage
13 Nov 2007
Some pictures of the Zuma quad at A-Basin. It appears to be almost finished if it isn't already.
Attached File(s)
-
IMG_1430.JPG (1.57MB)
Number of downloads: 60 -
IMG_1431.JPG (1.71MB)
Number of downloads: 48 -
IMG_1432.JPG (2.07MB)
Number of downloads: 54 -
IMG_1436.JPG (1.42MB)
Number of downloads: 47
Lift Kid
14 Nov 2007
Man...I'm gonna be at home back there! I can't wait to see some snow back there.
Allan
14 Nov 2007
Shawn, on Oct 24 2007, 12:38 PM, said:
I don't mind the sonalerts, but the horn you can hear for about 1000 ft in every direction.
I hate those things too! Does the horn have an allen head adjustment screw on it? If so tighten that sucker up and your problems are solved.
I hate those things too! Does the horn have an allen head adjustment screw on it? If so tighten that sucker up and your problems are solved.
Found the volume control potentiometer inside the horn. Now you can hear it from the ground below the station and not on the deck at the lodge.
liftmech
15 Nov 2007
Skier, on Nov 4 2007, 08:22 PM, said:
Does anyone know what these 4 cables are? There is the big red one, which contains three copper cables and then a skinny black copper one and 2 pvc pipes.
crystal_...4_07_044.jpg

The 'big red one' is primary power, three-phase usually, which will then be stepped down to 480 inside the transformer that will be sitting on that concrete pad. The skinny black one is comms, and the copper appears to be the ground for the transformer. I coudn't tell you what's in the PVC, depends on where the pipes lead. If they go from the transformer to the lift itself then they are the main 480 feed.
You get any dust or other foreign particles in your eyes that day

Limelight
28 Nov 2007
Anymore progress on Northway, such as the splice? Skier, are you still following this for your project?
Snoqualmie guy
28 Nov 2007
Will it be harder to hook up to cable or whatever they do since the lift is a mile long?
Peter
28 Nov 2007
Yeah, I am but I am pretty much done with the hours for my project. As of last week the cable was strung but not spliced. Load test is scheduled for this week and the opening is on Dec. 8th snow permitting.
ski89
28 Nov 2007
Rowell Hill is coming along... Cable spliced last tue.
Attached File(s)
-
Dscf0016.jpg (294.39K)
Number of downloads: 44 -
Dscf0014.jpg (292.28K)
Number of downloads: 49