Doppelmayr Ctec
floridaskier
25 Jan 2004
How are the newer Stealth 3's from a maintainance poit of view?
lastchair_44
25 Jan 2004
The Stealth 3's are really nice to work in except for the fact that the tire bank is positioned right above the rail and it's kinda tight in there.
KZ
26 Jan 2004
THey have several types of coverings, and i think they all look good. I may scan some pictures soon of other types. Very nice lifts...
iceberg210
01 Feb 2004
Sorry i really like CTEC although I am not really a fan of Doppelmayr and the Doppelmayr lifts seem to be more uncofortable and not as smooth. These things have seemed to carry over to the new CTEC Doppelmayr lifts so I loved CTEC don't get me wrong it just seemed like ever since the buy out they are more like the Doppelmayr's that I don't really like.
liftmech
02 Feb 2004
lastchair_44, on Jan 25 2004, 07:56 PM, said:
The Stealth 3's are really nice to work in except for the fact that the tire bank is positioned right above the rail and it's kinda tight in there.
I noticed on the Pony Express at Steamboat that the drive belts for the tyres are located on the outside of the bank, opposite the walkway. Is this true for all Stealths? It looks like it would be difficult to change worn belts that way.
SkiBachelor
02 Feb 2004
Actaully, I remember Garaventa CTEC having an add showing their new Stealth 2 terminal in an old issue. So I looked into it today, and yes the tire bank is on the outside, however it looks easy to change the belts. There are metal platforms covering brake rail and you just lean over switch it. I wish I had a picture to show you though.
liftmech
02 Feb 2004
Are you referring to the compression rail, perhaps? Elsewhere on the forum and in the feature on the Omega grip you talk about the 'brake rail', but the only rail I see in the picture is the compression rail.
I ask about the belt location because Poma and Doppelmayr both have their belts on the inside of the tyre bank, where one can change out a worn or broken belt very easily. It looks like the CTEC version would have the tech climbing over the tyre bank and then fighting the comp rail in order to loosen and change a belt.
I ask about the belt location because Poma and Doppelmayr both have their belts on the inside of the tyre bank, where one can change out a worn or broken belt very easily. It looks like the CTEC version would have the tech climbing over the tyre bank and then fighting the comp rail in order to loosen and change a belt.

