Model Working Ski Lift
SkiBachelor
20 Jan 2005
Most trams actually travel at a speed of 12 m/s.
Isn't that the tram that had the accident last year where the operator wasn't paying attention and the trams ramed right into the terminals or a terminal?
Isn't that the tram that had the accident last year where the operator wasn't paying attention and the trams ramed right into the terminals or a terminal?
WBSKI
23 Jan 2005
Here is a video of my lego tram.
Video
This post has been edited by WBSKI: 29 January 2005 - 06:58 PM
Video
This post has been edited by WBSKI: 29 January 2005 - 06:58 PM
Duck
24 Jan 2005
Zage, on Jan 21 2005, 11:33 AM, said:
That tram can run about 24 km/h, according to Poma.
<{POST_SNAPBACK}>
<{POST_SNAPBACK}>
Hmm. 12.5 m/sec is 45 km/h, though...
-Iain
Zage
28 Jan 2005
[quote name='WBSKI' date='Jan 23 2005, 11:08 AM']
reversing gondola.
All of my lifts can run in reverse.
reversing gondola.
All of my lifts can run in reverse.
WBSKI
28 Jan 2005
What i mean is that the gondola cannot go around the wheels at each end, i suppose what you call it is a tram.
WBSKI
29 Jan 2005
Two more model ski lifts built.
I now have in addition to my 2 seat chairlift and tram a ropetow which runs from the midstation on the two seat chairlift and a cable car (like the ones in san francisco) running through the valley ( the floor ) I hope to take more pics and videos soon. :)
I now have in addition to my 2 seat chairlift and tram a ropetow which runs from the midstation on the two seat chairlift and a cable car (like the ones in san francisco) running through the valley ( the floor ) I hope to take more pics and videos soon. :)
ski_Lift_modeler
29 Jan 2005
check my thread to check out my bi cable gondola. (in progress)
highspeedquad
02 Feb 2005
I would think that it would be hard to get a detachable grip to work with Knex. If you've done it, I'd like a close up.
Zage
07 Feb 2005
I have designed cabins for my tram that look like the ones on the Vanoise. :D
Boeinglover
13 Feb 2005
I'd like to do one that stretches across my room with some materials @ home depot and some spare parts I have lurking around in my basement. It would have a couple of stations and would be a detatchable gondola with the best logo I've created for a ski resort so far on each cabin. Would anyone like a tower to be named after them? I'm only in the prelimenary stages of planning so far (it will probably be done by late August) so there might not be any dedications, but just in case please ask for a dedication.
Boeinglover
Boeinglover
highspeedquad
13 Feb 2005
I cen borrow my father's digital camera to take pictures, since I'm a close friend of Boeinglover's. I might be able to help him out too.
Boeinglover
13 Feb 2005
I do think this will actually work and I would love for highspeedquad's help! I just (about 5 minutes ago) took apart two remote control cars and removed the motors from them (a total of 2 small ones and 1 big one). I'll be using fishing wire for the cable (I should have enough from my old fishing pole). I do hope that it will be detatchable, but maybe not. It will be a gondola with 2 stations. I have a little (kind of) workbench down in my basement and an armful of tools. I'm right now calculating the dimensions of my room so that I know how much fishing wire to use. I'll be attempting to tie a tiny knot to tie this togeter. I might also break down and use superglue to bind the fishing wire. It will hopefully be detachable but it may not be. I think with a little help from my friends, this will work.
Boeinglover
Boeinglover

