Random Lift Images
liftmech
24 Nov 2003
As a longtime Riblet fan/fixer-upper, can I defend them in saying that I like their towers? I know a lot of you think they're ugly, but I have found them to be some of the better designs from that era. The loop around the tower (the 'halo') was used primarily for guidage, but I've found it to be useful as a catwalk- and most companies didn't have catwalks until the late 1980s. Also- Riblet's last tower design was modern, yet distinctive. It had lifting frames like everyone else, yet it didn't look like everyone else's. From a distance, you can't really tell Doppelmayr from CTEC from Poma these days. Thanks for letting me vent my opinion.
SkiBachelor
24 Nov 2003
Check out the lower terminal of this pulse gondola. Great lift engineering at its best!
Attached File(s)
-
gondola.jpg (35.06K)
Number of downloads: 98
SkiBachelor
25 Nov 2003
Probably in Switzerland or Austria. I don't know the manufacutre.
edmontonguy
25 Nov 2003
that'd be kinda crappy to have to walk all those stairs though. and it seems to lack capacity
vancouverguy
26 Nov 2003
Notice how short the loading platform is. If it's an FG, it would have to run pretty slow.
This post has been edited by vancouverguy: 26 November 2003 - 05:17 PM
This post has been edited by vancouverguy: 26 November 2003 - 05:17 PM
Tinel
26 Nov 2003
SkiBachelor, on Nov 6 2003, 11:30 PM, said:
Here is a picture of a Von Roll HSQ. Now the funny thing about this lift is that it's the terminal that Doppelmayr uses so much over here in North America. But Von Roll might have designed it right before Doppelmayr merged with them.
This is not a von Roll-product. This lift is from "Doppelmayr Thun". They bought von Roll 1996 but until 1999 the were writing von Roll on their lifts! (Please excuse my English, I am from Switzerland!)
vancouverguy
26 Nov 2003
That's odd. I wonder why they don't swich over and just use the Doppelmayr trademark.
This post has been edited by vancouverguy: 26 November 2003 - 05:17 PM
This post has been edited by vancouverguy: 26 November 2003 - 05:17 PM
edmontonguy
26 Nov 2003
i thought funitels were robust but this is overkill
Attached File(s)
-
trincerone_livrio_2.jpg (56.83K)
Number of downloads: 72
SkiBachelor
26 Nov 2003
Remember that Poma funitel with that wacky electricity tower in France, that is just like this one pretty much.
edmontonguy
27 Nov 2003
its a funifor which is basically as you can see a bicable funitel
ski europe
29 Nov 2003
edmontonguy, on Nov 27 2003, 09:24 PM, said:
its a funifor which is basically as you can see a bicable funitel
They have two cabins, which drive on their own!(?) It doesn't have poles(?) !
They just built a second one in Italy, which does have Poles(?)! We (www.alpinforum.com) didn't find out how the new one works, yet!
ski europe
30 Nov 2003
Have a look at : www.hoelzl.it ! It is also in English! Check out the "Funifor"
I will try to get some more pistures!
I will try to get some more pistures!
SkiBachelor
02 Dec 2003
Here is a shot of the built in chair rail system in a Doppelmayr UNI-G terminal. The chair rail is no longer needed.
Attached File(s)
-
uni_g.jpg (11.51K)
Number of downloads: 50

