40 replies to this topic

[DonaldMReif]

I was at Copper Mountain last Thursday.

Got many photos of the chairlifts, including several hundred of American Flyer, the American Eagle, and the Timberline Express.

Also got some photos of lifts I'd never been on before, like Rendezvous and the new Union Creek lift.

Here are a few of Union Creek:

 DSCN4359.JPG (1.94MB)
Number of downloads: 203  DSCN4737.JPG (1.94MB)
Number of downloads: 330  DSCN4738.JPG (1.95MB)
Number of downloads: 340  DSCN4739.JPG (1.93MB)
Number of downloads: 315  DSCN4740.JPG (1.94MB)
Number of downloads: 242  DSCN4742.JPG (1.95MB)
Number of downloads: 235  DSCN4743.JPG (1.86MB)
Number of downloads: 233  DSCN4745.JPG (1.86MB)
Number of downloads: 229  DSCN4747.JPG (1.94MB)
Number of downloads: 223  DSCN4749.JPG (1.82MB)
Number of downloads: 166

[2milehi]

Two copper comm lines and one fiber. I wonder what the plans are for the fiber line?

[SkiBachelor]

What's up with those weird looking restraint bars?

[DonaldMReif]

SkiBachelor, on 17 March 2013 - 05:12 PM, said:

What's up with those weird looking restraint bars?

Those are the new Doppelmayr design. I think another thread had photos of another lift with this design.

[vons]

It's Doppelmayr's "kid safe" foot rest, the bars go between your knees, Copper was one of the first to get them.

[liftmech]

2milehi, on 16 March 2013 - 02:42 PM, said:

Two copper comm lines and one fiber. I wonder what the plans are for the fiber line?

Fiber is for IT. I don't know what their plans are since it currently dead-ends at the top of the lift and goes nowhere else on the hill.

Donald-- shoot me a PM next time you plan on coming up. If it's between Sunday and Wednesday I'll give you a tour.

[DonaldMReif]

liftmech, on 21 March 2013 - 06:41 AM, said:

Fiber is for IT. I don't know what their plans are since it currently dead-ends at the top of the lift and goes nowhere else on the hill.

Donald-- shoot me a PM next time you plan on coming up. If it's between Sunday and Wednesday I'll give you a tour.

I am on the Epic Pass. This was a one-time trip to Copper on passes from one of my dad's office friends.

Maybe someone can look at the Mountaineer at Deer Valley, and tell me if that has a fiber line.

I also recorded a ride on the lift, too;
http://www.youtube.c...h?v=RVOrozIeesA

This post has been edited by DonaldMReif: 21 March 2013 - 01:31 PM

[lastchair_44]

DonaldMReif, on 21 March 2013 - 01:30 PM, said:

I am on the Epic Pass. This was a one-time trip to Copper on passes from one of my dad's office friends.

Maybe someone can look at the Mountaineer at Deer Valley, and tell me if that has a fiber line.

I also recorded a ride on the lift, too;
http://www.youtube.c...h?v=RVOrozIeesA

Mountaineer at Deer Valley most likely has fiber as it is utilized for PLC communications between stations. I don't see why they would need a separate fiber line from the bottom of that lift.

[2milehi]

DonaldMReif, on 21 March 2013 - 01:30 PM, said:

I am on the Epic Pass. This was a one-time trip to Copper on passes from one of my dad's office friends.

Maybe someone can look at the Mountaineer at Deer Valley, and tell me if that has a fiber line.

I also recorded a ride on the lift, too;
http://www.youtube.c...h?v=RVOrozIeesA

Doppelmayr, one comm line - that has to be copper.

[DonaldMReif]

Some Timberline Express photos:

 Timberline (10).JPG (1.92MB)
Number of downloads: 62  Timberline (1).JPG (1.89MB)
Number of downloads: 93  Timberline (2).JPG (1.63MB)
Number of downloads: 91  Timberline (7).JPG (1.84MB)
Number of downloads: 82  Timberline (13).JPG (1.89MB)
Number of downloads: 69  Timberline (14).JPG (1.64MB)
Number of downloads: 67  Timberline (15).JPG (1.93MB)
Number of downloads: 63  Timberline (17).JPG (1.91MB)
Number of downloads: 55  Timberline (20).JPG (1.79MB)
Number of downloads: 47  Timberline (25).JPG (1.93MB)
Number of downloads: 49  Timberline (31).JPG (1.83MB)
Number of downloads: 49  Timberline (32).JPG (1.94MB)
Number of downloads: 49  Timberline (26).JPG (1.93MB)
Number of downloads: 39  Timberline (27).JPG (1.94MB)
Number of downloads: 35  Timberline (29).JPG (1.91MB)
Number of downloads: 34  Timberline (30).JPG (1.83MB)
Number of downloads: 34  Extra Timberline (1).JPG (1.67MB)
Number of downloads: 34  Extra Timberline (2).JPG (1.75MB)
Number of downloads: 32  Extra Timberline (3).JPG (1.86MB)
Number of downloads: 34  Extra Timberline (4).JPG (1.94MB)
Number of downloads: 33  Extra Timberline (5).JPG (1.92MB)
Number of downloads: 33  Extra Timberline (6).JPG (1.91MB)
Number of downloads: 34  Extra Timberline (7).JPG (1.8MB)
Number of downloads: 44  Extra Timberline (8).JPG (1.88MB)
Number of downloads: 50  Extra Timberline (9).JPG (1.86MB)
Number of downloads: 36

[liftmech]

I'm tagging on to your thread, Donald. Taking down the Prom Queen, top terminal.
 image.jpg (1.45MB)
Number of downloads: 139

[vons]

Are you guys getting 100% new or are you reusing the towers?

[liftmech]

Re-using the tower tubes. All new terminals.

[vons]

Here are some pictures of the general location of the Platter lift.

Attached File(s)

•  nikon coolL4 081.JPG (992.5K)
  Number of downloads: 118
•  nikon coolL4 083.JPG (982.95K)
  Number of downloads: 123

This post has been edited by vons: 21 April 2013 - 03:08 PM

[Peter]

vons, on 21 April 2013 - 03:02 PM, said:

Here are some pictures of the general location of the Platter lift.

Is the platter going to be Doppelmayr like the T-Bar?

[Lift Dinosaur]

liftmech, on 18 April 2013 - 07:14 AM, said:

I'm tagging on to your thread, Donald. Taking down the Prom Queen, top terminal.
image.jpg

Looks like a nice day for a rope splice

Dino

[vons]

I don't know what type of Platter Copper is getting. The Excelerator web cam has been pointed toward Storm King now.

[liftmech]

Both lifts will be Doppelmayrs. Dino, it was a classic Storm King day-- snowing sideways at 40+.

[DonaldMReif]

liftmech, on 22 April 2013 - 03:58 PM, said:

Both lifts will be Doppelmayrs. Dino, it was a classic Storm King day-- snowing sideways at 40+.

I guess since Union Creek was a Doppelmayr, that would make sense. And Doppelmayr has built more T-bars in Colorado than Poma has, I think (the only Poma built T-bar in Colorado I'm aware of is North Face at Crested Butte).

[missouriskier]

liftmech, on 18 April 2013 - 07:14 AM, said:

I'm tagging on to your thread, Donald. Taking down the Prom Queen, top terminal.
image.jpg

To Storm King; I say goodbye. I will miss that lift the next time I'm at Copper. Mostly because it was the first major surface lift I ever rode, way back on 3/4/02 before I was even eight years old. It also now leaves only one detachable poma in Colorado that runs on a regular basis, I think.