Skilifts.org / SORT Forum

We are looking for an OEM Yan 3 grip work chair. If you have one gracing your bone yard you want to get rid of let us know. We could also be interested in any other Yan built work chair with a 11/2" grip. Fred at Homewood Mountain Resort. Please email to fscholz@skihomewood.com.

We don't have one for sale, but if you happen to have one built for an older Type 1 or 2 you could swap out the 1 1/4 or 1 3/8 grip with a 1 1/2. We never had a Type 3-specific chair so that's what we came up with. If you still have the original aluminum assemblies you need to be careful flying by, but otherwise the setup works.

This would be for the Madden Triple right?

http://www.skilifts....dden/madden.htm
This post has been edited by SkiLiftsRock: 10 December 2010 - 04:24 PM

I'll second liftmech's reply. At my previous resort we used the same work chair for our Yans 1 1/4, 1 3/8, and 1 1/2 inch rope sizes. The 1 1/2 rope sized lifts included both type 3 and d/t. Getting a 1 1/2 type d/t grip might be easiest.