←  Lift Components For Sale or Wanted

Skilifts.org / SORT Forum

»

Poma Line Machinery

willis's Photo willis 03 Sep 2008

Anyone want to trade beer/cat parts/$/? for 5ea. 6S and 1ea. 8S rocker and a few assorted shafts. I hate to scrap this stuff out. Would be US made Poma machinery probably 1988 to 1992. Contact 503-272-3195 for specifics
Reply

Don CoyoteŽ's Photo Don CoyoteŽ 11 Apr 2009

Got pics? :blush:


I'm building a 1960's Poma (platter) lift, and I need parts. :sad:

I made some, but I made the wrong ones. My buddy owns a defunct ski-resort and has two Pomas, and a t-bar. Only one of the pomas had an upper-part of a carriage, and that's the one I copied. Unfortunately, the two Pomas run opposite each other,..... therefore, I made the wrong part. (If I were working on the lift I took the part off from, It'd work just fine). :crying:

So,......... what are these pieces YOU have? :w00t:

Attached File(s)

Reply

skiersage's Photo skiersage 11 Apr 2009

First off, I believe willis is selling sheave assemblies for a Poma brand chairlift, not an actual poma lift.

Second, you should re phrase yourself because I have no idea what message you are trying to convey.
Reply

skier691's Photo skier691 12 Apr 2009

View Postskiersage, on Apr 11 2009, 10:56 PM, said:

First off, I believe willis is selling sheave assemblies for a Poma brand chairlift, not an actual poma lift.

Second, you should re phrase yourself because I have no idea what message you are trying to convey.

Sounds like he made parts (hanger arms) for a clockwise lift when he needed counter-clockwise, or vise versa.??
Reply

Don CoyoteŽ's Photo Don CoyoteŽ 12 Apr 2009

"Hanger Arms"? :dry:

I suppose. I made five of the contraptions that attach to the cable.

SCRATCH THAT,..... the carriage, (sheave?) isn't ATTACHED to the cable,..... but yeah,..... THAT thing.

I'm building this lift to service snowboarders... so the "Platter" seat is out. Instead, I have a simple set of handlebars to hold onto. (Our hills are kinda short, I'm hoping I can actually hang on until I reach the top). :rolleyes:


I'm a machinist, by trade..... so I took a vacation day and played at work on my personal projects. I built five "Hanger Arms" for my lift,..... not realizing that I made them backward. I discovered THAT after closer inspection of the OTHER platter lift that I took my example piece from. (They are polar opposites). :cursing:

I guess I'll just do it again, and make the proper ones. (I'll save the ones I have, for just-in-case we actually rebuild the OTHER lift). :smile:
Reply

Don CoyoteŽ's Photo Don CoyoteŽ 13 Apr 2009

This is the bugger I made..... :rolleyes: .......................

Attached File(s)

  • Attached File  Grip.JPG (43.24K)
    Number of downloads: 15
Reply

Don CoyoteŽ's Photo Don CoyoteŽ 13 Apr 2009

This is the original. (This is a right,..... I need a left). :censored2:

.....(Or vice-versa). :unsure:

Attached File(s)

Reply